How does the aluminum profile cutting machine prevent the surface of the material from scratching
Aluminum profile cutting machine equipment in the sawing process, aluminum material surface scratches occur from time to time, some of the surface appearance requirements of higher products is difficult to achieve qualified, generally this situation, there are the following reasons.
First, the aluminum profile material itself is deformed, because the thicker aluminum profile is easily deformed in the extrusion process, and scratches are caused on the equipment table when the aluminum profile cutting machine equipment is automatically fed. The solution is to install a layer of 5MM epoxy resin plate on the table before and after the aluminum profile cutting machine equipment, and lock it on the equipment table through punching and countersunk holes during installation. Pay attention to the same installation height before and after the sawing table position, after the saw slit position is installed, the old saw blade can be used to cut the groove. This method can solve the problem of scratches on the surface of aluminum profile cutting machine materials, but it is necessary to replace the new epoxy resin board regularly, otherwise it is easy to wear and affect the cutting effect after the board is used for a long time.
Second, the aluminum profile cutting machine equipment rack and the main machine are not adjusted properly. When the tail is higher than the head main machine, the high head of the sawn material tail is lowered to an inclined state. In the automatic feeding process, the head is easily scraped on the side of the saw seam discharge when it is sent to the saw seam position. Only by adjusting the level of the material rack can this problem be avoided.
Company Address
No.16, Jiangong Avenue, Nanfeng Town, Zhangjiagang City
Telephone
Get in touch with us! We will provide you with a great solution!
Copyright©2024 Yuchuan Machinery Co., Ltd. All Rights Reserved.
Powered by:300.cn